This July, Greenpop is exploring why we should #CHOOSECANS as an alternative to plastic to combat pollution and environmental degradation.
To start to understand the environmental impact of a can, we need to look at a can’s whole lifecycle – and assess at every point how a can will impact the environment. Read our blog post below to understand how a can is made.
The Raw Material: Aluminium
Cans are made from aluminium.
Aluminium is the most common metal on earth, however due to its attributes, it is rarely found in its pure form. It is more commonly found in compounds with other metals, which can be mined and refined into aluminium. Bauxite is the main source for aluminium on our planet with known reserves of over 29 million tonnes, most of them in Guinea, Brazil, Jamaica, Australia and India. At the current extraction rate, these reserves should last more than 100 years .
Aluminium has very unique characteristics, which make it extremely popular. It is one of the lightest metals, without compromising strength and flexibility and it is also corrosion-resistant, thanks to aluminium oxides on the metal’s surface. On top of that, the process of recycling aluminium uses comparably little in energy and the material doesn’t lose any of its qualities whilst going through it.
Today, this metal is used in many industries like transportation, building and of course packaging.
The Manufacturing Process
Before it can be turned into a can, aluminium needs to be extracted from the raw bauxite it is compounded with. The process it then goes through consists of three stages and is called the primary production. When aluminium gets recycled that’s called secondary production.
1st Stage – Mining
Bauxite commonly contains 20-25% aluminium and due to the iron oxides, it usually has a red or brown colour . Most of the supplies lie very close to the surface, making open cast mining the most common way to extract bauxite from the ground. Before mining, the area will be cleared, meaning the removal of vegetation, rocks, etc.  Then the soil, as well as the overburden covering the bauxite, are removed so the bauxite beneath can be broken up. To do that there are many methods available, e.g. drilling or blasting. After that, the raw material gets transported to a new site where it gets crushed into smaller pieces and washed before it can enter the next stage of the production line.
2nd Stage – Refining
The raw bauxite is cleaned and ready to be broken up into the parts it consists of, which are silica, iron oxides, titanium dioxide and, most importantly, aluminium oxides. The principal way to extract the latter from the raw material is the Bayer Process, invented by the Austrian chemist, Carl Josef Bayer in 1887 . First, the bauxite gets milled and heated in a mixture with sodium hydroxide using a temperature between 150-200 degrees celsius, so the aluminium oxides and silica dissolve. The other components stay solid and can be filtered out, with alumina oxides remaining as sodium aluminates alongside silica. Then this mixture enters a procedure of precipitation after which only the aluminium oxides remain. Another round of heating and drying at a temperature of 1010-1260 degrees celsius and this also called alumina is visible as a white powder.
3rd Stage – Metal Production
The alumina is now ready to be transformed into actual metal. For that, the energy-intensive Hall-Héroult process comes to use , which the two scientists Hall and Héroult separately invented in 1886. Before that, producing aluminium was very expensive, due to alumina’s high melting point. Aluminium was produced by electrolysis of molten sodium aluminium tetrachloride. To lower the melting point, Hall and Héroult mixed the alumina with molten cryolite instead. The aluminium oxide’s oxygen atoms have to be split from the aluminium atoms, therefore carbon anodes are needed for the reduction process and carbon dioxide is one of the process’ end products, alongside aluminium. The production ratio in this stage is 2:1, meaning two 2 tonnes of alumina make up 1 tonne of aluminium. After this, the aluminium is finally available in its metallic form and can be shipped to the manufacturing plants in coils. From here on the actual process of building a can starts.
Building a can
The most common beverage cans are two-pieced, meaning that two pieces of aluminium are used to build the can. First, a machine cuts circular discs of metal out of the sheets . Those then get drawn and ironed, known as the DWI process. The first means the reshaping of the metal pieces into cylinders without losing the material’s thickness. After that, they pass through circular dies to thin the walls, called ironing. Usually, the edges of the aluminium cylinders are irregular, so trimmers cut them to identical heights. Remember that at all stages, surplus material, like the trimmed edges or the leftovers after the cutting process will rejoin the production circle and get recycled.
Now the can bodies have the right size and can be cleaned and dried to remove any unwanted lubricants before they get coated externally to then dry again and be printed. First, by rolling against a cylinder, the print gets applied, then a different applicator adds the varnish at the bottom of the can . For the inside, a sprayer puts on a special coating to protect the can from corrosion and the content from interaction with the metal. Between and after these coating and printing steps the can gets “baked” in an oven to dry.
The can body is almost ready. The last steps in this manufacturing stage prepare the neck for the lid, also called end, to be attached. A necker reduces the wall’s diameter and a flanger curves the edge to be acceptive of the end after the filling of the can. Then the cans have to pass one last test for any leaks before they are ready to be shipped to the filling plant.
The Use & Recycling of Cans
Cans are mainly used for beverages like sodas and beer or to store food and are widely used across the world. Every year 200 billion cans are used – that’s 6,700 cans per second.
Only 9% of plastic waste produced between 1950 and 2015 (around 6.3 billion metric tons) was recycled . In comparison, in 2018 more than 73% of old aluminium products were recycled  – making aluminium cans the most recycled item in the world.
The ease with which cans can be recycled is one of its most important attributes. Producing new aluminium from manufacturing scraps and old end-of-life products is called secondary production. The process is so attractive because aluminium can be 100% recycled and retains its quality throughout. Also, it takes only 5% of the energy needed for primary production , because it leaves out the energy-intensive Bayer- and Hall-Héroult-processes.
Thus it only takes 60 days to make a new can out of an old one and get it back to the supermarket.
‘Cans are special because the loop – consuming, throwing it away and collecting it – only takes 60 days. So, this [can] will be drunk, thrown away, collected and it will be a can again in 60 days. That’s a really quick cycle’, claims Alexander Kuzan, vice president of Can, Novelis Europe, the world’s largest recycler of aluminium .
The lifecycle of a can is a true cycle because a can be recycled and reused for the same purpose on an infinite loop.
Whilst the production of aluminium is extremely energy-intensive – it takes more energy to mine and produce aluminium than any other metal – 95% of this energy is saved in secondary production due to the recycling of aluminium cans. It is this closed-loop production process, which can be repeated infinitely, that makes cans a suitable alternative to plastic.
When manufacturers and brands decide to invest in closed-loop packaging supplies, we will be able to start tackling the battle against plastic and pollution.
And we, as consumers, can vote to #CHOOSECANS, instead of plastic, with every purchase.
This July, Greenpop has partnered with CAN DO! to explore the environmental impact of aluminium cans, and whether cans are a more sustainable alternative to plastic.
Are cans more sustainable than plastic? Should you #CHOOSECANS?
 Hydro Aluminium life cycle
 Aluminium Leader How aluminium is produced
 Aluminium for Future Generations Mining Process
 World of Chemicals Manufacturing of alumina through the Bayer process
 U.S. National Institutes of Health’s National Library of Medicine The Aluminum Smelting Process
 Metal Packaging Manufacturers Association How are cans made
 Can Manufacturers Institute How cans are made
 Don’t bottle it Why aluminium cans may be the answer to the world’s plastic problem
 The World Counts Aluminium cans facts
 Geographical Don’t bottle it: why aluminium cans may be the answer to the world’s plastic problem
Composting is surprisingly easy with these 4 steps – you can even do it at home, and don’t need a lot of space.
Treading lightly is very important to us. So at this year’s Reforest Fest, Greenpop along with CapeNature, Compost Cyclers and PETCO aimed to reduce our waste as much as possible! Our Zero Waste Festival Guide, along with CapeNature’s #DontBeTrashy campaign, helped us ensure our festival was as eco-friendly as possible.
Pesto Princess Cooking Sauces: What Keeps 100 Hungry Tree planters Going?25 APRIL, 2022By Skye MallacIf you’ve ever spent a full day on a reforestation site, nestling thousands of baby trees into their new homes on an Overberg hillside, you’ll probably know what I...
Greenpop Foundation NPC is a registered non-profit organisation. Registration Number (NPO): 151-411 NPO.